94470

The Design Engineering 94470 Fire Sleeve is an essential safety component for electrical installations in hazardous locations where the risk of fire is present. This fire sleeve is specifically designed for use with electrical conduit and cable bundles, providing a protective barrier against fire and heat.

This fire sleeve is available in a length of 100 feet and a diameter of 375 inches (or 30.42 inches, equivalent to 2.53 feet). It's important to note that the actual length you can install with this sleeve may vary depending on the number of conduits or cables you are running through it, as well as any bends or turns in the installation.

The Design Engineering 94470 Fire Sleeve is made from a high-density, closed-cell, fire-resistant foam material. This material has a low smoke density, meaning it produces less smoke when burned, making it an ideal choice for applications where visibility is important. The foam is also resistant to water, making it suitable for use in wet or damp environments.

The sleeve's outer layer is composed of a tough, heat-resistant, and UV-stable jacket. This jacket provides an additional layer of protection against physical damage and environmental elements, ensuring the longevity of the fire sleeve.

This fire sleeve is UL-listed and CSA-certified, meeting the requirements of Underwriters Laboratories and Canadian Standards Association for use in Class I, Division 2 and Class II, Division 2 hazardous locations. It's important to consult the UL and CSA standards to ensure proper installation and application of this fire sleeve.

Installation of the Design Engineering 94470 Fire Sleeve is straightforward. Simply slide the sleeve over the electrical conduit or cable bundle before installing it in the hazardous location. The sleeve can be easily cut to length using a knife or other sharp tool, and it can be rejoined using the provided splice tape and clamps.

In summary, the Design Engineering 94470 Fire Sleeve is a reliable and effective solution for protecting electrical installations in hazardous locations from the risk of fire. Its high-density foam material, tough outer layer, and UL and CSA certifications make it a trusted choice for electricians and other professionals in the field.

Buying a 94470 fire sleeve with a length of 375 inches (approximately 100 feet) for design engineering purposes involves considering both advantages and disadvantages. Here are some potential pros and cons:

1. Enhanced Fire Protection: Fire sleeves provide an additional layer of insulation to protect pipes and other structures from fire damage. Using a sleeve with a longer length, such as 100 feet, can offer extensive protection for larger installations.

2. Compliance with Regulations: Depending on the specific application and industry regulations, using a fire sleeve may be required to ensure safety and compliance.

3. Reduced Downtime: In the event of a fire, having a fire sleeve in place can help minimize the downtime required for repairs and restoration.

1. Cost: Fire sleeves can be expensive, especially when considering a long length like 100 feet. The cost of the sleeve itself, as well as the cost of installation, should be carefully considered.

2. Installation Complexity: Installing a long fire sleeve can be a complex process, requiring specialized equipment and expertise. The installation process may also require significant time and resources.

3. Weight and Handling: A long fire sleeve can be heavy and difficult to handle, especially during installation. Careful planning and execution are necessary to ensure safe and effective installation.

When deciding whether to buy a 94470 fire sleeve with a length of 375 inches (approximately 100 feet), it's important to weigh the potential advantages and disadvantages carefully. While the sleeve offers enhanced fire protection and potential compliance with regulations, it also comes with a significant cost and installation complexity. Careful consideration of the specific application, budget, and installation capabilities is necessary to determine if the benefits outweigh the costs.

If the application requires extensive fire protection and compliance with regulations, then investing in a 94470 fire sleeve with a length of 100 feet may be a worthwhile investment. However, it's recommended to carefully evaluate the costs and installation complexities before making a decision. Consulting with a fire protection expert or engineer can also provide valuable insights and recommendations.

Details:

Our sound management collection allows you to keep the noise levels down in your vehicle or isolate them certain areas for better quality. Our heat management products keep different parts of your vehicle safe from over-heating and exposure to increase performance safety. Part #: 94470. Design engineering Fire sleeve .375in x 100ft universal.

specifications heatnshield:

• for models: Fire
• brand: Design Engineering
• mpn: 94470
• part type: Fire Sleeve
• warranty: 1 Year
• max temperature rating: 500 Degree
• product length: 100 Ft.
• prop 65 yes/no: Yes
• title: Dei 94470 Fire Sleeve 0.375 Id X 100 010470b100
• direct heat resistance: 500 F
• radiant heat resistance: 2000 F
• includes: One 50 Foot Roll Of Fire Sleeve With A 3/8 Inch Inside Diameter.
• prop 65 short label: Warning
• color: Black
• inside diameter: 0.375 In
• length: 1200 In
• material: Silicone Wrapped Fiberglass
• country of origin: Canada
• upc: 607078944702

returns heatnshield:

• paid by: buyer
• policy: returns accepted
• time: 30 days

seller heatnshield:

• city: coral, pennsylvania
• rating: 99.7%
• # reviews: 3452

general heatnshield:

• category: Auto Parts > Car Truck Accessories > Exhaust Emission Systems > Heat Shields, Wraps Sleeves

offer heatnshield:

• started: july 16, 2025
• options: ship-to-home
• in stock #: 5
• sold #: 14
• availability: in stock
• prices: $363.99–$429.40
• item condition: New

shipping heatnshield:

• class: standard
• service: ups ground
• type: fixed
• transit: 2-5 days
• carrier: ups

payments heatnshield:

• wallet: apple-pay
• credit card: visa
• other

Recently Viewed:

• 10477: HEAT SHIELD FIRE WRAP, Design Engineering
• 10458: HEAT SHROUD, Design Engineering
• 10450: PIPE SHIELD, Design Engineering
• 10880: HEAT SHIELD ENGINE, Design Engineering
• 10211: TIE, Design Engineering
• 10433: TUBE, Design Engineering
• 10634: FUEL LINE COVER QUARTER, Design Engineering
• 93405: HEAT SHROUD, Design Engineering
• 10208: TIE, Design Engineering
• 10129: EXHAUST WRAP, Design Engineering
• 10258: HEAT SHIELD EXHAUST, Design Engineering